
Home Backup Solution
Plan home backup around the devices you need most during an outage. WZRELB pure sine wave inverters convert battery DC power to AC; choose the battery system, inverter configuration and load plan together.
Start with four checks
- List the loads used together. Add their electrical input watts. Use a microwave’s input rating, rather than its cooking-output rating.
- Check startup separately. Refrigerators, pumps and other motor loads can need more power when starting. Check the appliance requirement and the inverter’s available surge capacity and duration; a running-watt figure alone is insufficient.
- Match the power system. Confirm battery DC voltage, AC voltage and frequency. RBP3000 and SPT6000 are ordered as a particular configuration; their voltage options are not automatic voltage selection.
- Plan runtime from the battery. Inverter watts describe power capacity, not stored energy. Battery usable energy, conversion losses, inverter consumption and the actual load determine runtime.
Choose a starting configuration
These are conditional starting points, not tested appliance bundles. The links marked “example” select a real configuration; change it to match your own battery and equipment before ordering.
| Your use | Conditions to check | Models and next step |
|---|---|---|
| Portable power for compatible electronics or small AC loads | Compatible DeWalt 20V MAX batteries; one to four packs. One battery supports up to 250W. Two or more compatible batteries support up to 500W (ETP500) or 600W (ETP600) continuous, subject to battery condition, discharge capability and connected load. | ETP500 / ETP600 — two 120V AC outlets, USB-A and USB-C PD outputs. Check each device’s input rating and required frequency. |
| A dedicated battery system with single-phase AC loads | Up to 3000W continuous; check startup demand and battery discharge capability. Choose matching DC input, AC output and frequency. |
RBP3000: 48V DC → 120V AC / 60Hz example Other configurations are listed on the product page. A 220/230/240V RBP3000 is single-phase and does not provide a 120V/240V split-phase supply. |
| A planned split-phase backup system | 6000W continuous / 12000W peak. Peak power is for startup, not a continuous 12000W load. Select the matching DC input and AC output/frequency. |
SPT6000: 48V DC → 120V/240V AC / 60Hz example SPT6000 has no 12V DC input option. Confirm circuit loading and installation design before connecting fixed household wiring. |
On a phone, swipe the table sideways to read all columns.
What to buy and prepare
- ETP500 / ETP600: inverter, compatible batteries and a separate compatible battery charger. Batteries and charger are not included; the ETP inverter does not recharge the batteries. It is not a 12V car-socket inverter.
- Battery-bank inverters: confirm the exact DC/AC/frequency version, a suitable battery system, battery charging equipment and installation parts. Check the selected product’s package contents; cable and protection requirements depend on the installation.
For a battery-bank installation, have the battery/BMS, DC cables, fuse or breaker, ventilation, grounding and AC connections checked for the selected model. Follow its manual and use a qualified installer for fixed wiring. Do not backfeed an AC outlet or connect inverter output directly to grid or shore power.
Will it run my refrigerator or the whole house?
A model name or a 6000W rating does not establish whole-house compatibility. Check the combined running load, compressor or motor startup, battery capability and the requirements of each circuit. Send the appliance ratings for review before selecting a refrigerator, pump or other demanding load.
Read before choosing
- What can a 3000W power inverter run?
- Why does an inverter trip when the fridge starts?
- ETP battery inverter guide for DeWalt 20V MAX users
Installation examples: Battery-inverter installation example · Home backup inverter setup example. Check your selected model’s manual; a video is not a compatibility test for your own load.
Need help choosing home backup power?
Email info@powerreliable.com with your battery voltage and capacity, battery/BMS discharge limits if available, device input watts, startup requirement, required AC voltage/frequency, and target runtime. We can review the configuration before you order.
Browse 3000W inverter configurations










Home backup inverter setup example
