RBQ Series Pure Sine Wave Inverter

2000 Watt Pure Sine Wave Inverter with Wired Remote

• True Pure Sine Wave Output: This RBQ series inverter converts DC power to clean AC power for household equipment with continuous 2000W output and surge power of 4000W. It supports 110VAC or 120VAC output and 50Hz or 60Hz frequency according to customer requirement, making it suitable for home backup, RV use, truck power, solar systems, and off-grid installations.
  
• USB and PD Charging Ports: Equipped with a 2.4A 5V USB port for phones and tablets, plus a 60W PD port, this inverter supports both AC appliance use and convenient charging for small digital devices.
  
• Low Interference and Low Idle Power Draw: Designed with low interference technology and low idle power consumption, it helps improve the performance of televisions, audio equipment, communication devices, and other sensitive loads while reducing unnecessary circuit loss.
  
• RS485 Communication Port: The inverter includes an RS485 port for communication with solar systems. If you need the communication protocol, customer service confirmation is required before use.
  
• Wired Remote LCD Display and 16ft Remote Control: This wired remote version supports a remote LCD display and remote control with a 16ft cable, making it easier to monitor battery voltage and control the inverter when the main unit is mounted inside an RV compartment, off-grid cabinet, work truck, or backup power box.
  
• Stable Cooling and Full Protection: Intelligent temperature-controlled dual cooling fans help maintain long-term stability. The inverter also includes over-voltage and under-voltage shut down, audible alarm and LED indicator for abnormal voltage, overload protection, short-circuit shut down, and over-temperature protection.
  
• Off-Grid and Emergency Use: This inverter is suitable for off-grid and emergency use with fully charged batteries. It can be used in solar and wind systems together with a solar charge controller, giving users a practical plug-and-play backup power solution.
  
• Compact Metal Housing: Machine size is approximately 30 x 22.5 x 8 cm and net weight is about 3.06 kg (6.7 lbs). The metal housing and dual-fan design support durability and heat dissipation during extended use.
  

Attentions for resistive load applications:

If you need the inverter to run resistive loads such as laptops, TVs, electric cookers, lights, routers, and chargers, please choose the inverter with continuous power higher than the appliance's rated power. For daily use, it is better to use about 80% of the rated power for improved stability and longer service life.

Attentions for inductive load applications:

If you use refrigerators, freezers, microwaves, water pumps, air conditioners and other appliances with compressors or motors, please choose the inverter whose continuous power is 3-7 times higher than the appliance's working power. Some motor loads may require even higher surge margin during startup.

Warranty: 12 Months for Non-artificial damage.

Machine Size (cm)	30 x 22.5 x 8
Net Weight	3.06 kg / 6.7 lbs
Model	RBQ-2000W
Wattage	2000 W
Surge Power	4000 W
DC Input Voltage	Please confirm battery voltage when ordering
Voltage Range	Depends on selected battery system version
No Load Current Draw	< 0.9A
Efficiency	90%
DC Connector	Battery cables
AC Output Voltage	110VAC / 120VAC
Frequency	50Hz / 60Hz
Waveform	Pure Sine Wave
AC Regulation	5%
Low Voltage Alarm	Depends on selected battery system version
Low Voltage Shut Down	Depends on selected battery system version
Over Load	Shut Off Output
Over Voltage Shut Down	Depends on selected battery system version
Over Thermal	Shut Off Output Automatically
Fuses	Short Circuit
Working Temperature	Between -10°C and +50°C
Working Humidity	20%~90% RH non-condensing
Storage Temperature	Between -30°C and +70°C
Start	Soft Start
Cooling Ways	Cooling Fan
Total Harmonic Distortion	THD < 3%
Package Size (cm)	35.5 x 30 x 16.5
Gross Weight	3.9 kg

 

Choose your spec from the size options. Please confirm your battery voltage, AC output voltage (110VAC or 120VAC), and frequency (50Hz or 60Hz) before ordering.

This inverter does not auto-sense input or output voltage. Please choose one battery system version, one output voltage, and one frequency when ordering. If you need a specific socket type, please leave your message before shipment.

Note: This inverter is single-phase. Please confirm the exact output specification before ordering.

1. Can I add a fuse or circuit breaker between the input terminal of the inverter and the battery?

Yes. The common calculation method is: continuous power ÷ lowest input voltage = recommended fuse ampere. The exact fuse size still depends on the battery system version and cable design, so final confirmation before shipment is recommended.

2. Can this inverter work with a solar system?

Yes. This RBQ series inverter can be used in solar and wind systems together with a suitable solar charge controller and properly matched battery bank.

3. Why did sparks appear when connecting the battery cable?

This is usually normal. The inverter has internal capacitors, so a small spark may appear when the battery cable is first connected.

4. Why does the inverter shut down under load?

Please check whether the battery capacity is sufficient, whether the battery voltage is dropping too much under load, and whether the cable size and fuse size are correct. Long or thin cables can create noticeable voltage drop.

5. What is included in the package?

Standard packing includes:

1x 2000 W pure sine wave inverter,
1x wired remote LCD display and remote control (16ft wire),
1x fuse replacement,
1x battery cables,
1x manual.

6. What is the advantage of the wired remote version?

The wired remote version is more convenient when the inverter is installed in a less accessible place. It allows the user to monitor and control the unit from a distance through the remote LCD display and the 16ft cable.