Copy for test

Save 15%

Size: 1000W 12VDC TO 120VAC
Price:
Sale price$169.00 Regular price$199.00

WZRELB Pure Sine Wave Inverter With Remote Controller Switch

-- 1000 Watt 12 Volt, 24 Volt or 48 Volt DC Volt input

  • 1000W (surge 2000W) pure sine wave inverter120V 60HZ USA outlets, with 2 pcs of cables with cable lug terminals, manual, and warranty card. Everything you need to complete the installation is included.
  • Choose your DC volt input from the size options. The DC to AC inverter converts 12V DC 24VDC or 48VDC (Only One DC voltinput) power from battery to 120V AC. Please confirm your battery voltage first and choose from the option about the DC volt input, 12V,24V or 48V. It is can power for AC electronics such as oven, heater, Air conditioner, kettle, TV, Computer ect in vehicle, home, office or outdoor use.
  • Rated power: 1000W; surge power: 2000W -- a good source of backup power supply for off grid system or emergency like power failure.
  • Reliable performance-- the 1000W Power inverter is equipped with extra thick (2.0mm) PCB which greatly enhances the load capacity of the inverter.
  • Protections, under voltage alarm cut down protection, over voltage protection, reverse fuse protection, high volt cut off protection, Over current, Over load shut off protection, Short circuit fuses protection, Over thermal production.
  • Run your appliance safe and sound-- high frequency transformer of the inverter transfers DC to AC and ensures the stable and full AC output.
  • Perfect sine wave perfects the performance-- high quality mosfets and true copper inductance work together to make perfect pure sine wave AC output.
  • Monitor power usage with no effort-- LED Display for both DC volt and AC volt which makes the power usage clear for users.
  • Silent cooling system-- intelligent silent fan cools the inverter down automatically without any annoying noise. There is rational and sufficient design of heat sink inside.
  • All around protection of the power inverter.High voltage input cut off protection, low voltage alarm protection, overload protection, over current protection, surge power protection, reverse connection protection and short circuit protection by fuse.
  • WZRELB is a professional Manufacturer of pure sine wave inverter since 2009 who owns the exclusive technology of the pure sine wave DC to AC power conversion.
  • Warranty: 18 Months after the puchase of the power inverter.
  • Attentions  for resistive load applications:
  • If you need the inverter to run the resistive load (like laptop, TV, electric cooker, light), please choose the inverter with continuous power higher than the appliance's rated power.For example, for the power inverter with continuous power 2500w,it is suggested to run the appliance with rated power less than 2500w. It is better to use 80% of the rated power.
  • Attentions for inductive load applications:
    If you need the inverter to run the inductive load (for appliance such as compressor, motor, water pump), please calculate the power of inverter 3 to 7 times higher than the rated power of your appliance.
  • Note:We can also supply.60VDC,72VDC,96VDC, 110VDC input to 220V, 230V or 240VAC output, 50Hz with other kinds of sockets such as German, UK, French, Australian, or universal socket ect. Please consult us. 
  • 1000w
  •  Size (inch) 13.8 x 9.5 x 3.7
    Net Weight (pound) 6.6
    Wattage  1000w 
    DC Input Voltage Range 10-15v/21-30v/42-60v
    AC Output Voltage 120v
    No Load Current Draw 1.5A
    Efficiency 85% -- 90%
    AC Regulation 3%
    Frequency 60Hz
    Scoket 15A US Type
    Low Voltage Alarm 9.5-10.5v/19.5-21.5v/43-45v
    Low Voltage Shut Down 9-10v/18.5-20.5v/41-43v
    Over Load Shut Off & Recover Manually
    Over Voltage Shut Down 15.5v/30.5v/61.2v
    Over Voltage Protection Shut Off Output Automatically
    Over Heat Protection Cooling Fans Run When It's Over 120 F
    Cooling Fans 2
    Working Temperature  -10℃ TO 50℃  /  -50℉ TO 122℉ 
    Storage Temperature  -30℃ TO 70℃  /  -86℉ TO 158℉ 
    Working Humidity  20% TO 90% RH Non-condensing
    Start Soft Start
    Total Harmonic Distortion THD<5%
  • Download manual


    1.What size inverter do I need?

    Choosing the right size of inverter depends
    on the power requirements of the appliances you expect to operate at any given
    time,including both the
    continuous and surge power rating of your appliance. The continuous rating of
    the inverter must be high enough to handle all the loads that may run at the
    same time. The inverter must also be capable of handling the starting surge of
    all loads that may start at the same time.

    Commonly used electrical appliances can
    usually be divided into resistive load and inductive load

    The inverter can work with most resistive
    loads less than its continuous power,such as :laptops,phones, TVs, electric cookers,LED lights,fans,etc.But
    for most inductive loads whose vast majority power consumption takes place in
    the compressor or motor, such as refrigerators,freezers ,microwaves,Water pumps,
    air conditioners ,power tools ,etc .Their instantaneous power in startup phase
    is 6-7 times ,or even 10 times bigger as it’s working power .So we
    suggest  use 10 times higher power inverter for inductive loads

     

    2.Can the inverter run 24/7?

    Yes, but please ensure that the battery
    capacity can always support the inverter's energy supply.

     

    3.Can I use an inverter to power my
    computer?

    Yes,it’s pure sine wave inverter ,which is
    pefect for a computer or a laptop.

     

    4.Can I use an inverter to recharge my
    batteries?

    It is not recommended to use the inverter
    to recharge the battery, which may damage the inverter

     

    5.Can inverters be stacked, such as
    connecting two inverters in series or parallel to obtain double output voltage
    or double output power?

    No,the inverters cannot be stacked in
    series or parallel

     

    6.Can the inverter be connected to the grid
    power?

    No ,the inverter is off grid only ,prohibit
    connection to mains

     

    7.Use a polarity tester to test the
    inverter.When I check the 120 volt output of a WZRELB inverter with a
    polarity  tester ,it shows an open
    ground,but I have actually grounded it correctly. Is this normal? 

    What you are seeing is normal .The tester
    you’re using is for use with household utility power ;the inverter is a standalone
    system, the internal wiring of the inverter causes this symptom.

    8.Can i get 220v output for 110VAC
    version ?

    No,the inverter we provide is
    single-phased,just one input voltage and one output voltage ,it can't divide
    two lines of 110v that sum to 220v.It has only one output voltage 110vac or
    220vac.

     

    9.There is a 60v between neutral wire and
    ground wire on the terminal ?Is it normal ?

    It shows a voltage between the red line and
    the yellow line. There is also a voltage between the black line and the yellow
    line. They are virtual voltages and have no current. It is normal.

     

    10.Can the output voltage be adjusted?

    During use, due to load or other factors,
    the output voltage may deviate from the normal use range.Pls kindly known that
    the output voltage can be reset in a certain range at your end .

     

    11.Can the input voltage be adjusted
    from 24vdc to 12vdc?

    The 24 volt input cannot be changed to 12
    volts. This is the factory setting and involves a series of parts inside the
    inverter.


    Return Policy
    WARRANTY:
    Yueqing Reliable Electric Co.,Ltd hereb warrants the pure sine wave power inverter in accordance with the following terms and conditons.

    Scope of warranty

    12 Months from the date of original purchase.

    All power inverters purchased directly from Yueqing Reliable Electric Co.,Ltd.which are defective in material and/or workmanship.

    Technical support and service are provided for the inverter the whole life.

    Please read the user's manual before you install the power inverter.

    Exclusions
    1. Defects or damage caused by accident, fire, flood, lightning or other acts of nature.
    2. Defects or damage caused by abuse, misuse, negligence or failure to observe the instructions contained in the manual.
    3. Defects or damage caused during the shipment or handling.
    4. Power inverters that have their warranty seal altered or removed without authorization.
    5. Power inverters that have been altered or repaired by any one oher than Reliable Electric in the manner that has affected their performance, stability or reliability.

    RETURN

    Please note that we only accept returns within 30 days after delivery, with the condition that the power inverter is sellable.

    If the item is defective/DOA (Dead on Arrival) we must be notified within 2 days of arrival by email or messenger, the instruction for return will be given accordingly.

    Please note: All returned items must be in brand new condition with all original accessories in the original box. If anything is missing or damaged, we reserve the right and refuse the return or charge additional restocking fees.

    Before you return the power inverter, please email us in advance. Otherwise you may not be able to get the refund.

    Return Address in USA

    18501 Arenth Ave, City of Industry, CA 91748
    Email: reliablepower2009@gmail.com



    FEEDBACK

    Note: Do not hesitate to contact us anytime before and after the purchases, we are committed to your 100% customer satisfaction.

    I am here and ready to assist you with any question or concerns you might have before or after the purchase.

    If you have the problem with the item, please contact us first.


    Attentions

    For resistive load applications:
    If you need the inverter to run the resistive load (like laptop, TV, electric cooker, light), please choose the inverter with continuous power higher than the appliance's rated power.For example, for the power inverter with continuous power 2500w,it is suggested to run the appliance with rated power less than 2500w. It is better to use 80% of the rated power.


    For inductive load applications:
    If you need the inverter to run the inductive load (for appliance such as compressor, motor, water pump), please calculate the power of inverter 3 to 7 times higher than the rated power of your appliance.

    My goal is to make sure you are happy and having the pleasant shopping with us.

    1. Can I add a fuse or circuit breaker between the input terminal of the inverter and the battery? If so, what specifications are recommended?

    Yes,the following is the calculation method of fuse ampere.  

    Continuous power of the inverter ÷ Lowest input voltage =Fuse ampere ,e.g.

    3000W 12VDC version: recommed a 300Amp fuse (3000W÷10VDC=300Amp)

    3000W 24VDC version: recommed a 150Amp fuse (3000W÷20VDC=150Amp)

    3000W 36VDC version: recommed a 100Amp fuse (3000W÷30VDC=100Amp)

    3000W 48VDC version: recommed  a 75Amp fuse (3000W÷40VDC=75Amp)

    2Why did sparks appear on the cable and the inverter terminal when connecting the battery to the inverter?

    This is normal, and it is not that the inverter is malfunctioning. The inverter has built-in large capacitors, a very small amount of power is still stored inside. When the battery cable is connected to the input of the inverter, sparks may appear, which is a discharge process.Please feel free to use it

    3. Why the inverter's output voltage keeps dropping or even shuts down automatically when running loads ?

    e.g 3000W 12VDC version

    1). Pls check If there is a fuse or breaker installed in your systemGenerally,we recommend that a 300Amp fuse be installed between the inverter and the battery.

    2). Pls check if use standard cables all . If 4 cables, please use them all, or the output will only be about a half. If you use your own cable, please make sure that the cable specification is larger than AWG 4, and if the length exceeds 24 inch, please thicken the cable .

    Note that there is a voltage drop between the battery and the inverter. The thinner and longer the cable, the greater the voltage drop

    • Pls check if the battery capacity is too small .We recommend connecting to a battery system ≥ 300AH for a 3000-watt 12vDC inverter. When the DC LED reading drops while the load is running, it is likely that your battery capacity is too small to supply power to the load. Please try to add other batteries to your previous battery system.

    4. Why the inverter can't be turned on?

    Pls fully charge the battery before installing the inverter . There are some large capacitors built into the inverter, so it may be in the low-voltage protection or even unable to turn on when the battery power is low

    5. Why can't my inverter run the refrigerator? Compressor are inductive in nature and would be a hard load on the inverter.

    The vast majority of the refrigerator's power consumption takes place in the compressor, which kicks the instantaneous power in startup phase to 6-7 times ,or even 10 times bigger as its working power. .If you want to power up a refrigerator, we suggest you use 10 times higher power inverter. Please check that the load within the allowable range

    You may also like

    Recently viewed